Din Rear-Mount; Installation Using The Screw Holes On The Side Of The Unit - Pioneer AVX-7650 Manual Del Usuario

Installation

DIN Rear-mount

Installation using the screw holes on
the side of the unit
• Fastening the unit to the factory
radio mounting bracket. (Fig.
10) (Fig. 11) (Fig. 12)
Select a position where the screw holes
of the bracket and the screw holes of
this product become aligned (are fit-
ted), and tighten the screws at 2 places
on each side. Use any of binding
screws (4 × 3 mm), binding screws (5
× 6 mm) or flush surface screws (5 × 6
mm), depending on the shape of the
screw holes in the bracket.
*1 Use binding screws (4 × 3 mm) only.
* 1
• When installing in a shallow space,
use the following screw holes. In
this case, stick conceal tape on parts
that protrude from the dashboard.
* 1
* 1
11
* 1
Fig. 10
Conceal tape
Fig. 11
Factory radio mounting
bracket
Screw
Dashboard or
Console
Fig. 12