ABB Busch-Dimmer 6593 U-500 Manual Del Usuario página 53

I ns t alla tion for Remote
Con trol
28 Installation for Remote Control
Installation for Remote Control
The Dimmer can be used as a component of the IR
Remote Control
combined with the Remote Control
6066-xxx.
The position of installation should be within the IR
reception area.
The IR reception area may be varied by extraneous light
(e.g. sunlight, lighting).
Installation of the IR Operating Element
First set the desired address on the IR Operating Element
6066-xxx (see Fig. 5). Clip the Operating Element onto the
FM version of Dimmer. At the same time, ensure that the
IR Operating Element does not become jammed in the
frame.
®
System. In this case, the dimmer is to be
ENG
®
IR
®
IR Operating Element
53