Operation And Maintenance; Technical Parameters; Environment Protection - GRAPHITE 59G022 Manual De Instrucciones

Unplug the power cord from mains socket before commencing any activities related to installation,
adjustment, repair or maintenance.
Always keep the tool clean.
Do not use water or any other liquid for cleaning.
Use a brush or a dry piece of cloth to clean the power tool.
Clean working tools with a wire brush.
Clean ventilation holes regularly to prevent motor overheating.
In case of excessive commutator sparking, have the technical condition of carbon brushes of the motor
checked by a qualified person.
Store the tool in a dry place, beyond reach of children.
REPLACEMENT OF CARBON BRUSHES
Replace immediately worn out (shorter than 5 mm), burnt or cracked motor carbon brushes. Always
replace both carbon brushes at a time.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be
used.
All defects should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Supply voltage
Input current frequency
Rated power
Idle oscillation speed
Oscillation angle
Pad dimensions
Protection class
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp = 84 dB(A); K = 3 dB(A)
A
Sound power: Lw = 95 dB(A) ; K = 3 dB(A)
A
Vibration acceleration: a
h
Do not dispose of electrically powered products with household wastes, they should be utilized in
proper plants. Obtain information on wastes utilization from your seller or local authorities. Used up
electric and electronic equipment contains substances active in natural environment. Unrecycled
equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.

OPERATION AND MAINTENANCE

TECHNICAL PARAMETERS

Multi Purpose Tool
= 9 m/s 2 K= 1.5 m/s 2

ENVIRONMENT PROTECTION

Value
230 V AC
50 Hz
180 W
20 000 min
2.8°
80 x 80 x 80 mm
II
1.35 kg
2018
14
-1