Making The Electrical Connection; Ball/Downrod Assembly - HAMPTON BAY 91371 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
7
Wiring the receiver to the
household wiring.
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you feel
you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
□
Spread the wires apart so that the green and white wires are
on one side of the outlet box and the black wire is on the other
side.
□
Connect the green fan wires to the household ground wire (this
may be a green or bare wire) using a wire connecting nut (BB).
□
Connect the receiver black (or red) wire to the household black
(hot) wire using a wire connecting nut (BB).
□
Connect the receiver white wire to the household white wire
(neutral) using a wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
Black
Black
(or Red)
Outlet Box
in the ceiling
(MM)
Green (or Bare)
BB (x3)
White
Green
White
Receiver
Antenna
Receiver(K)
8

Making the electrical connection

NOTE: The frequencies on your receiver and transmitter have
been preset at the factory. Before installing the receiver, make
sure the dip switches on the receiver and transmitter are set
to the same frequency. The dip switches on the transmitter are
located inside the battery compartment.
□
The fan comes with 54 in. lead wire for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra room
in the canopy (C), if you do not wish to cut the wires, you will
need to neatly wrap them.
□
Connect the fan motor white wire to the receiver white wire
using a wire connecting nut (BB).
□
Connect the fan motor black wire to the receiver black wire
using a wire connecting nut (BB).
□
Connect the fan motor blue wire to the receiver blue wire using
a wire connecting nut (BB).
□
Secure each wire connecting nut (BB) using electrical tape.
□
Turn the wire connecting nut (BB) upward and push wiring into
the outlet box (MM).
Receiver (K)
Blue
BB (x3)
11
Please contact 1-855-HD-HAMPTON for further assistance.
Outlet box
in the ceiling
(MM)
Green
Receiver
Antenna
Black White
HAMPTONBAY.COM