Maintenace - koban KMD 04 Manual De Instrucciones

KMD 04
Digital multimeter

Maintenace

Cleaning meter
Warning
Before opening the back cover, turn off the meter and disconnect test
leads from any circuit.
Clean meter with a damp cloth and mild detergent; do not use chemical
solvents on the meter. Dirt or moisture on the inputjacks can affect the
reading of the meter.
• Turn the rotary switch to OFF and remove test leads.
• Remove all dirt from the input jacks.
• Use a detergent or lubricant with a cotton swab to clean the jacks. Use a
new cotton swab for each jack to prevent cross contamination.
Changing Battery/fuses
Warning
To avoid electric shock and personal injury, turn off the meter and remove
the test leads before opening the battery cover.
Replace fuses with ones that have the exact same ratings:
F1: F400mA/1000V; F2:F10A/600V
To replace battery and fuses:
1. Turn off the meter.
2. Disconnect test leads from input jacks.
3. Use a screwdriver and remove the back cover from the meter.
4. Remove used battery and replace with a new 9V battery.
5. Remove and replace blow fuses with new ones.
6. Replace back cover before using meter again.
Instructions manual | 38 www.grupotemper.com