Hfe Transistor Gain; Capacitance - koban KMD 04 Manual De Instrucciones

hFE Transistor gain

Warning
Remove the transistor under test from any circuit to prevent damage to
the meter.
To measure transistor gain:
1. Turn the rotary switch to the hFE position.
2. Connect the multi-function socket to the hFE (+) input jack and the COM
jack.
3. Connect the transistor to the appropriate holes in the multi-function
socket depending on the type of transistor (NPN or PNP).
4. The display will show the measured transistor gain.

Capacitance

Warning
Turn off all power and discharge all capacitors before testing capacitance.
Capacitance ranges are: 4.000nF, 40.00nF, 400.0nF, 4.000μF, 40.00μF, 200μF.
To measure capacitance:
1. Turn the rotary switch to the
to capacitance mode.
2. Connect the red test lead to the
COM jack.
3. Connect the leads to the circuit under test.
4. Read the measured capacitance on the display.
Tips for measuring capacitance:
When measuring large capacitances, wait a few seconds for readings to
stabilize. This is normal for high capacitance measurements.
www.grupotemper.com
Digital multimeter
position. Press
input jack and the black test lead to the
Instructions manual |
KMD 04
3 times to switch
31