Robern FAIRHAVEN Instrucciones De Instalación página 2

Cabinet Dimensions
Surface Mounted Cabinet
26"
(660.4 mm)
34"
(863.6 mm)
(584.2 mm)
Cabinet Location
When selecting the cabinet location, note the following:
■
There must be at least a 2" (50.8 mm) clearance between the top of the faucet spout and the
bottom of the cabinet crown molding and at least 1" (25.4 mm) clearance from the top of the
cabinet crown molding to the ceiling (see Figure B).
■
Power for the Electrical option should be
routed and located as shown in Figure G.
■
If recess mounting a cabinet, make sure
there is at least 3 ¾" (95.3 mm) clearance
in the wall for the recessed portion of the
cabinet.
D6 model = 5 ¾" (146 mm) deep
■
Be sure there is enough clearance above
and below the rough opening for the
remainder of the exposed cabinet.
FAIRHAVEN Cabinets 03/30/07
7 1/8"
(180.97mm)
23"
3 3/16"
(80.96 mm)
Figure A
Recess Mounted Cabinet
34"
(863.6 mm)
The dimensions for a fully-recessed and semi-recess-mounted cabinet
are the same, except for the crown molding depths:
Surface depths are 7 1/8" (180.9 mm) and 5 5/8" (142.8 mm).
Semi-recess depths are 5 5/16" (134.9 mm) and 3 3/16" (80.9 mm).
RECESSED
INSTALLATION
2
26"
(660.4 mm)
23"
(584.2 mm)
1" (25.4 mm) CLEARANCE
SURFACE
INSTALLATION
1" (25.4 mm) CLEARANCE
5 5/16"
(134.94 mm)
NOTE: This
portion of
the cabinet
is recessed.
3 3/16"
(80.96 mm)
Figure B