Disconnection; Voice Dial - Toyota BLU LOGIC Manual Del Usuario

No Phone 2 in car, Phone 1
connects
Only Phone 3 in car, Phone 3
connects

(3) Disconnection:

Follow these steps to disconnect the kit
from the current paired hand-set.
(A) Power off the vehicle. Phone should
automatically disconnect.
10
Using The System
1 3
3
(B.) If the phone does not automatically
disconnect Select "disconnect" from your
hand-set menu. See your hand-set user
manual for more details.
Using The System

(1) Voice Dial:

If your mobile's hand-set is voice dial
enabled, when in standby mode, press the
key. When you hear a beep' from your

hand-set, say the voice tag.
Note:
BLU Logic does not have voice dial feature
but is compatible with equipped phones.
A) Please make sure there are voice tags
recorded into the mobile hand-set before
using voice dialing function. This function
is only applicable to mobile hand-sets with
Hands-free Profile. Because of variations
among different hand-sets you may not hear
a beep. Please refer to your mobile hand-
set's user guide for additional information.