Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8
Maintenance and cleaning
8.1
Safety Precautions
Before carrying out any maintenance or cleaning operation, take the following precautions:
A) Make sure that all the parts of the stove are cold.
B) Make sure that the embers are completely extinguished.
C) Use personal protective equipment provided for by Directive 89/391/EEC.
D) Always use appropriate equipment for maintenance.
Maintenance must be performed by a specialist service centre or by qualified personnel.
8.2
Cleaning
The external part of the stove must only be cleaned with a dry, non-abrasive cloth. Do not use detergents.
8.3
Removal of ash from the fire box
The stove requires simple but frequent and thorough cleaning in order to always guarantee efficient performance and regular
operation.
•
Open the door;
•
remove any embers and ash from the fire box with a metal scoop
•
remove the ashes from the ash compartment using an adequate ash vacuum cleaner.
•
close the door
8.4
Adjusting the bypass valve
The stove is supplied with the bypass valve already adjusted (E throttle in abutment on the housing). If the adjustment is not
adequate, recalibrate the valve in order to obtain good combustion.
Firstly open the door A, and sequentially remove the cements: B (base wall), C (side walls) and D (upper top) (Fig. 8.4.1)
Loosen screw G until the butterfly E is at the end point on the box (Fig. 8.4.2)
Refit the cements D-C-B
C
C
B
B
A
A
D
D
C
C
Fig. 8.4.1
00 477 7300- 18/02/2019 - PALAZZETTI - PN - Italy
G
G
E
E
Product images are purely indicative
Fig. 8.4.2
29
Capítulos
Tabla de contenido
