Replacing The Exhaust Filter; Replacing The "Airclean" Filter; Replacing The "Active Airclean 50" Filter And The "Hepa Airclean 50" Filter - Miele SDAE0 Manual De Uso

en

Replacing the exhaust filter

Depending on model, the vacuum
cleaner will be equipped with one of the
following exhaust filters (see fig. 10):
a AirClean Filter
An "AirClean" filter is supplied with
every box of Miele filter bags. It should
be replaced each time a new box of
bags is started.
b Active AirClean 50 Filter (black)
c HEPA AirClean 50 Filter (white)
If the display of the exhaust filter
change indicator has turned fully red
(see fig. 15).
The indicator light will come on after
approx. 50 hours of operation, which is
equivalent to one year of average use.
The vacuum cleaner can still be used
however, the filter performance and
suction power will be reduced.
Replacing the "AirClean" filter (see
fig. 32 + 33)
Do not use more than one filter at a
time.
^ Open the dust compartment lid.
^ Squeeze the release for the filter
frame and open until it clicks.
^ Grasp one of the two clean corners
(see arrow) to remove the used
AirClean exhaust filter.
^ Insert the new filter.
16
If you wish to replace the AirClean
filter with an Active AirClean 50 filter
or HEPA AirClean 50 filter see
"Maintenance and care -
Exchanging exhaust filters".
^ Close the dust compartment lid firmly
until it clicks into place.
Replacing the "Active AirClean 50"
filter and the "HEPA AirClean 50"
filter (see fig. 34 + 35)
Do not use more than one filter at a
time.
^ Open the dust compartment lid.
^ Remove the exhaust filter.
^ Insert the new filter.
^ Press the exhaust filter change
indicator ~ (see fig. 13).
^ After about 10-15 seconds, a small
red marker will appear in the left-hand
side of the display (see fig. 14).
If you wish to replace the Active
AirClean 50 filter or the HEPA
AirClean 50 filter with an AirClean
filter see "Maintenance and care -
Exchanging exhaust filters".
^ Close the dust compartment lid firmly
until it clicks into place.