Wiring Heat Pump - Honeywell RTH2510 Serie Guía De Instalación Rápida

Advanced Installation Guide
Wiring—Heat Pump About your new thermostat
Connect wires: Heat Pump
1. Match each labeled wire with same letter on new
thermostat.
2. Use a screwdriver to loosen screws, insert wires into
hole under screw, then tighten screws until wire is
secure.
3. Push any excess wire back into the wall opening.
Labels don't match? See page 24.
Wiring complete, return to Step 7.
69-2726ES—01
B O G Y W/ R Rc
AUX
M32727
24