Carrying Out A Firmware Update; Care And Maintenance | Warranty - Weller WX 1 Traducción Del Manual Original

For your safety

Carrying out a firmware update

Notice
The station must not be switched off while the
firmware update is running.
Switch off station 1.
Care and maintenance
Warning!
Before doing any work on the machi-
ne, pull the plug out of the socket.
Clean the operator panel, if dirty, using a suitable
cleaning cloth.
Seal ports which are not in use with covering caps.
Warning! Risk of burns
Only replace solder tips when cold
„
Replace and clean suction nozzles
„
only when hot and using the suitable
tool
Only replace hot air nozzles using
„
the suitable tool
Only clean or replace solder
„
collection tubes when cold
Warranty
Claims by the buyer for physical defects are time-
barred after a period of one year from delivery to
the buyer. This does not apply to claims by the
buyer for indemnification in accordance with §§
478, 479 BGB (German Federal Law Gazette).
We shall only be liable for claims arising from a
warranty furnished by us if the quality or durability
warranty has been furnished by use in writing and
using the term „Warranty".
2. Insert the memory stick into the USB port.
Switch on station 3.
The firmware update is performed automatically.
If you have a more already installed more recent
firmware on your station, this will not be changed.
Filter change
Regularly check the main filter for vacuum, and
replace it if necessary.
Warning!
Working without a filter can result in irreparable
damage to the vacuum unit.
Check before starting soldering whether a main
„
filter is inserted.
Contaminated filters must be treated as special
waste.
Dispose of replaced equipment parts, filters
or old devices in accordance with the rules and regulations applicable in your country.
Wear suitable protective gear.
Warning!
Use original replacement parts only.
The warranty shall be void if damage is due to impro-
per use and if the device has been tampered with by
unauthorised persons.
Subject to technical alterations and amendments.
For more information please visit www.weller-tools.
com.
33