Charging The Transmitter - Medtronic Guardian Connect Manual De Usuario

3 Slide the cover back on the charger until it clicks into place.

Charging the transmitter

Caution: Always charge the transmitter before inserting your sensor. A
depleted transmitter does not function. A fully charged transmitter
works at least six days without recharging. A depleted transmitter
can take up to two hours to recharge.
Note: Do not store the transmitter on the charger for more than 60 days. Disconnect
and reconnect to the charger to re-charge again before use. If the transmitter
is left on the charger for more than 60 days, the battery will be permanently
damaged.
To charge the transmitter:
1 Push the two components together to connect the
transmitter to the charger.
2 Within 10 seconds after the transmitter is connected, a
green light on the charger will flash for one to two seconds
as the charger powers on. For the rest of the charging time,
the green light on the charger will continue to flash in a
pattern of four flashes with a pause between the four
flashes.
3 When charging is complete, the green light on the charger
will stay on, without flashing, for 15 to 20 seconds and then
turn off.
4 After the green charger light turns off, disconnect the
transmitter from the charger. The green light on the
transmitter will flash 10 times and then turn off.
-5-