Overload Clutch - DeWalt DC228 Manual De Instrucciones

E N G L I S H
Description (fi g. A, A1, D, H)
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
INTENDED USE
Your cordless rotary hammerdrills DC228, DC229,
DC232, DC233, DC234, DC235 have been
designed for professional drilling, hammerdrilling
and screwdriving applications as well as for light chipping.
DO NOT use under wet conditions or in presence
of fl ammable liquids or gases.
These heavy-duty rotary hammerdrills are
professional power tools. DO NOT let children
come into contact with the tool. Supervision is
required when inexperienced operators use this
tool.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
1 Variable speed switch
2 Forward/reverse slider
3 Mode selector
4 Safety lock
5 Tool holder
6 Locking collar
7 Dust cover
8 Depth adjustment rod
9 Side handle
10 Main handle
11 Battery pack
12 Release button
13 Charger
14 Charging indicators (red)
15 Tool holder locking sleeve
16 Chuck
Dust extraction system
17 Electrical pins for Dust extraction system
[DC228, DC229, DC232, DC233, DC234,
DC235 (except type 1)]
18 Dust extraction system (D25302DH, purchased
separately)
42
19 Dust extraction system attached to rotary
hammerdrill
DC228, DC232, DC229, DC233, DC234, DC235
(EXCEPT TYPE 1)
Dust extraction system D25302DH can be
purchased separately from your nearest authorised
D WALT dealer at additional cost.
E

Overload Clutch

In case of jamming of a drill bit, the drive to the
drill spindle is interrupted. Because of the resulting
forces, always hold the tool with both hands and
take a fi rm stance.
Brake Mechanism
When the variable speed switch is released,
the spindle will stop rotating instantly.
Active Vibration Control
The active vibration control neutralises rebound
vibration from the hammer mechanism. Lowering
hand and arm vibration, it allows more comfortable
use for longer periods of time and extends the
life of the unit. In operation, a spring loaded
mechanism counterbalances the vibration forces.
This can be sensed by the cushioning effect
when pressure is applied to the tool. Make sure
the spring is engaged but not too fi rmly. The
mechanism should be allowed to 'fl oat'.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double
E
insulated in accordance with EN 60335.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organization.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.