Installing The Seat In The Car - JANE IKonic Manual Del Usuario

Adjustable headrest with 5 different positions.
The safety seat can be reclined.
Fitted with insert for babies from 40 to 60 cm in height.
Convenience for parents:
The height of the shoulder straps can be adjusted without
having to take the straps off. This action is connected to
the headrest so it protects the baby better in the event of
a side impact while supporting the head.
The seat can be turned to face the door making it easier
to place the baby in it.
Removable and washable upholstery.
E. INSTALLING THE SEAT IN THE CAR
Before installing the safety seat, make sure that the
vehicle
seat where you are going to install it is i-Size, or that
it is fitted with ISOfix anchors and that your vehicle is on
the list of compatible vehicles.
(See your vehicle instruction manual, it will tell you which
of the vehicle seats are compatible with the safety seat.)
34
EN
IM 2046_02_IKONIC alta.indd 34
Main use options:
1 - Rear facing
For babies from 40 to 60 cm with the insert.
For children from 60 to 105 cm in height and a maximum
weight of 18 Kg without the insert.
Install the seat with ISOfix anchors and the anti-rotation
leg.
The child is secured with the 5-point harness fitted in
the seat.
2 - Forward facing
For children of 76 to 105 cm tall and with a maximum
weight of 18 kg.
Do not use in the forward facing position is the child is
less than 15 months old.
Install the seat with ISOfix anchors and the anti-rotation
leg.
The child is secured with the 5-point harness fitted in
the seat. The IKONIC safety seat should preferably be
installed on the rear seat of the vehicle. Before installing
the safety seat, make sure that the vehicle seat where
you are going to install it is i-Size, or that it is fitted with
ISOfix anchors and that your vehicle is on the list of com-
patible vehicles.
10/7/18 10:20