Technical Characteristics; First Use - Moulinex CD1008 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35

TECHNICAL CHARACTERISTICS

• The
preparation
automatically once the coffee flow is
finished.
• System for automatic drying of the
pod.
• Electro-mechanical pump: 2 bars.
• 1 cup pod holder.
• Removable
water
capacity of 0.9 L.
• Compatible with all flexible single cup
pods with a diameter of 71 mm.
DESCRIPTION
1 - Removable water tank
2 - Water tank cover
3 - Coffee preparation button
4 - Knob for locking and releasing the
percolator head
5 - Pod holder

FIRST USE

In order to ensure the best level of
quality, all of our appliances are tested
during
production.
recommend
that
appliance before first use, as follows:
• Remove the removable water tank.
• Fill it completely with cold drinking
water, and fit it to the appliance.
Note: the water tank can also be
filled without removing it from the
appliance.
MAKING A COFFEE
• The using technology eliminates the
need for preheating and waiting
around. The single button starts the
coffee preparation immediately. The
coffee
maker
automatically
optimal volume of coffee.
• Remove the removable water tank.
is
switched
tank
with
We
therefore
you
rinse
switches
itself
after
pouring
off
• No preheating time required.
• Power rating: 1450 W.
• Consumption
< 2W/h.
• Voltage: 230 V – 50 Hz.
• Double overheating safety device.
• Excess pressure safety device.
a
• Dimensions: L: 28 cm; W: 20 cm;
H: 26 cm
• Operates between 5°C and 45°C.
• Weight: 2 kg.
6 - Coffee tube
7 - Drip tray
The coffee maker only operates with
flexible pods (of a diameter of 71 mm),
available from most shops in different
brands.
• Plug the appliance into the mains
socket with an earth pin.
• Place a container under the coffee
tube.
the
• Check that the head is correctly
closed and in the locked position
• Press the button (3) to start a coffee
cycle.
• Repeat this operation as many times
as necessary to empty the water tank.
• The pod coffee maker is now ready
for use.
• Fill it with cold drinking water, and fit it
to the appliance.
• Release the percolator head by
turning the knob to the position
off
• Remove the pod holder and centre
the
the pod on it.
Note: the coffee should be evenly
distributed in the pod, so that it is flat.
20
in
stand-by
mode:
.
.
Tabla de contenido
loading

Tabla de contenido