Partially Erase A File - Olympus LS-10S Instrucciones

3
Press the 2 button to select [All
Erase].
4
Press the `/OK button.
• The display changes to [All Erase!] and
erasing will start. [Erase Done] is displayed
when the files are erased.

Partially erase a file

Only a PCM file recorded in the recorder can be
partially erased.
2 button
`/OK button
ERASE button
1
Select the folder which contains the
files you want to partial erase (☞ P.19
to P.21).
2
In the File list display, press the 2 or
3 button to select the file you want to
partial erase.
• In the File display, press the 9 or 0
button to select a file.
3
Play the file you want to partial erase.
• Forward a file to the position that shall be
erased. If the file is long, use the 9 button
to move to the position you want to delete.
4
At the starting position of the partial
erase, press the ERASE button.
[Partial Erase] will flash
on the display.
• While [Partial Erase] is flashing, the play-
back continues and rewind and fast-forward
are available to locate the erase-end
position quickly.
If it reaches to the file end while this indica-
tion is flashing, the file end will become the
erase end position.
Erasing
3
39