Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Double insulation
Wear dust mask
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
36
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The electro-tool is intended as a stationary
machine for making straight lengthways and
crossways cuts in wood. Horizontal mitre angles
of -45° to +45° as well as vertical bevel angles of
0° to +45° are possible.
ASSEMBLY
WARNING: To prevent the accidental
starting that could cause possible serious
personal injury, ALWAYS assemble all parts to
your saw BEFORE connecting it to the power
supply. The saw should NEVER be connected
to a power supply when you are assembling
parts, making adjustments, installing or removing
blades, or when not in use.
1. DUST EXTRACTION PORT (SEE FIG. A)
To reduce build up of saw dust and maintain top
efficiency of cutting, the saw dust collection can
be achieved by clipping a dust bag on the dust
extraction port (16).
A dust bag is provided for use on your miter
saw. To install it, simply fit the dust bag over the
extraction port on the upper blade guard.
To empty the dust bag, remove it from the dust
exhaust port, open the dust bag by unzipping the
slide fastener.
NOTE:To ensure optimal dust collecting,
empty the dust bag when it becomes filled to
approximately 2/3 of its capacity.
A
16
Tabla de contenido
