NAMCO VAMPIRE NIGHT DX Manual Del Operador página 38

5-2 Fitting the Gun Cabinet to the Monitor Cabinet
1. Remove 4off hex head screws (M8x30) and remove the Joint Brackets from their
shipping position. Refit the Joint Brackets as shown below with the 4off hex head
screws (M8x30).
2. Place the Gun Cabinet close to the Monitor Cabinet and connect the connectors.
3. Place the Gun Cabinet fully up to the Monitor Cabinet, taking care not to trap any
wires, and fit 4off hex head screws (M8x30)
Gun cabinet
Hex head screw
(M8x30)
Gun cabinet
Monitor cabinet
Joint bracket
Page 38
Joint bracket
Hex head screws
(M8x30)
12P
6P
2P
2P