Replacing The Sensor - NAMCO VAMPIRE NIGHT DX Manual Del Operador

7-4

Replacing the Sensor

1. Remove the Camera assy.
2. Remove 2off pozi head screws (M2.5x14), with flat and spring washers, and
remove the Sensor.
Pozi head screw (M2.5
(with flat and spring washers)
3. Reassemble in reverse order.
Note: Check the direction of the interruption sensor when reinstalling. If the sensor is
installed facing the wrong way, a message will appear on the screen and the
game cannot start.
(see 7-3 page 63)
Interruption sensor (note direction)
×
14)
Page 64
Camera unit