Freezer Features; Primary Features - Amana XRSR687BW El Manual Del Propietario

Freezer Features

What if These Features
are Different from Mine?

Primary Features

To avoid property damage, observe the following:
• Do not force ice maker arm down or up.
• Do not place or store anything in ice storage bin.
Automatic Dispensing Ice Maker
This ice maker creates the ice used in the dispensing
system.
Using Ice Maker for the First Time
• Confirm ice bin is in place
and ice maker arm is down.
• After freezer section reaches
between -18° to -17° C, ice
maker fills with water and
begins operating.
• Allow approximately 24 hours
after installation to receive first harvest of ice.
• Discard ice created within first 12 hours of
operation to verify system is flushed of impurities.
Operating Instructions
• Confirm ice bin is in place and ice maker arm is
down.
• After freezer section reaches -18° to -17° C, ice
maker fills with water and
begins operating. You will
have a complete harvest
of ice approximately every
3 hours.
• Stop ice production by
raising ice maker arm until
click is heard.
• Ice maker will remain in the off position until arm
is pushed down.
IMPORTANT: Ice Cream Shelf should not be
installed if ice maker arm is in "off" position
This book is intended to show the variety of features that are available in the product
line. If your refrigerator does not have all the options that are shown, many of these
options may be purchased by contacting your local distributor.
!
CAUTION
12
Ice Cream Shelf
The Ice Cream Shelf provides a space for items to be
chilled or frozen quickly.
• To remove, lift Ice Cream Shelf
from ice bin rails and pull
straight out.
• To install, reverse above
procedure.
IMPORTANT: Ice Cream Shelf should not be
installed if ice maker arm is in "off" position
Ice Storage Bin
The ice storage bin is located below the automatic
dispensing ice maker.
To remove and install ice storage bin:
• To remove bin, remove Ice Cream
Shelf. Raise ice maker arm to
deactivate ice maker.
• Lift front of bin and pull out to its full extension. Lift up
front of bin and remove.
• To install, slide bin into rails below ice maker until
bin locks into place. Drop ice maker arm to activate
ice maker, and replace Ice Cream Shelf.
IMPORTANT: Ice bin must
be locked in proper place for
proper ice dispensing. If freezer
door does not close, bin is not
in proper location. Turn auger
driver as shown to properly align
ice bin with back of unit.