Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Table of Contents
(After Battery Installation)
1. Introduction
Tripp Lite's Extended-Run Battery Cabinets connect to SmartOnline® UPS Systems to provide long-lasting battery backup for data centers,
telecommunications, networks, industrial facilities, security, emergency systems and other mission-critical applications that require high
capacity, high availability and extended runtime.
Features
• Battery cabinets are available in two options: BP480V370 and BP480V370NB. The BP480V370 model includes jumpers, terminals,
breaker, and 40 x of CSB GPL 121000 batteries in a separate pallet for a complete installation. The BP480V370NB model is a similar kit
but without batteries, allowing users the flexibility to purchase batteries for the cabinet separately.
• Battery cabinets are available in voltages of 480V DC and capacities option of 100Ah @ C20 to 1.67VPC.
• Battery cabinets contain multiple 12V DC batteries connected in series for higher voltages. Up to 3 battery cabinets may be connected in
parallel for increased runtime.
• Each battery cabinet contains 6 shelves with 5, 6, or 7 individual batteries (maximum) per shelf.
• Hinged lockable door facilitates access to batteries for periodic maintenance.
• A minimum of 130 mm clearance is located above the individual batteries for access to terminals.
• Battery cabinet is constructed of heavy gauge steel.
• Baked powder coat finish provides chip and corrosion resistance.
• Battery cabinet ships bolted to pallet with a double layer of protective stretch wrap and integrated corner and top protection.
• Appropriate ventilation and convection cooling of individual batteries is provided via spacing between batteries. Front and rear vents allow
the free flow of warmer air out of the battery cabinet.
• A molded case circuit breaker is provided for overcurrent protection.
• User-supplied power output cables can be fed into the battery cabinet via built-in conduit knockouts on top of the cabinet.
• For improved safety, higher power density and minimized maintenance, the cabinet systems use Valve-Regulated Lead-Acid (VRLA)
recombinant batteries. The electrolyte in these batteries is immobilized in either an absorbent mat separator or a gelling medium,
eliminating the spilling hazards and maintenance requirements of free liquid electrolyte. There is no need to add water or measure specific
gravity.
• Because the batteries are recombinant cells that employ an oxygen recombination cycle, minimal gasses are emitted during normal float
charging. Each cell contains an individual valve, which releases the gas products from overcharge and prevents pressure build-up within
the cell.
2
2
3
3
3
4
4
4
5
5
5
5
5
6
6
7
7
7
7
Русский
2
7
7
7
8
8
9
10
10
11
11
12
13
14
23
23
23
23
24
25
49
Capítulos
Tabla de contenido
