Tabla de contenido
Planned Maintenance Checklist
The following is a general maintenance checklist which covers the major components of your conveyor. This will be helpful
in establishing a standard maintenance schedule.
COMPONENT
MOTOR
REDUCER
DRIVE CHAIN
SPROCKETS
BELT
BEARINGS
(Pulleys & Rollers)
V-BELTS
STRUCTURAL
NOTE: Check Set Screws after the first 24 Hours of operation.
How to Order Replacement Parts
Included in this manual are parts drawings with complete
replacement parts lists. Minor fasteners, such as nuts and
bolts, are not included.
When ordering replacement parts:
1. . .
Contact Dealer from whom conveyor was purchased
or nearest HYTROL Distributor.
2. . .
Give Conveyor Model Number and Serial Number or
HYTROL Factory Order Number.
3. . .
Give Part Number and complete description from
Parts List.
4. . .
Give type of drive. Example—8" End Drive, 8" Center
Drive, etc.
5. . .
If you are in a breakdown situation, tell us.
22
SUGGESTED ACTION
Check Noise
Check Temperature
Check Mounting Bolts
Check Noise
Check Temperature
Check Oil Level
Check Tension
Lubricate
Check for Wear
Check for Wear
Check Set Screws & Keys
Check Tracking
Check Tension
Check Lacing
Check Noise
Check Mounting Bolts
Check Tension
Check for Wear
Check Sheave Alignment
General Check: All loose bolts, etc., tightened
SCHEDULE
Weekly
Monthly
Hytrol Conveyor
Company, Inc.
JONESBORO, ARKANSAS
SERIAL #
HYTROL Serial Number
(Located near Drive on
Powered Models).
Quarterly
Model
XX
978747
Tabla de contenido
