User Data Reset; Rebooting The Device - Urmet iPercom miro 1160 Manual Del Usuario

The routed call forwarding function of the CallMe app will be automatically disabled if the
automatic door opener service is enabled.
3.

USER DATA RESET

To restore default parameters of the device after entering programming mode, hold button
longer than 5 seconds, hold buttons
generate 2 long beeps and reboot.
The user data reset operation is irreversible.
4.

REBOOTING THE DEVICE

Rebooting is used to reboot the device. The operation cannot be undone.
To reboot, the door phone must be in stand-by mode. Hold the button pressed for at least 7 seconds.
DS1160-008A
and pressed for longer than 5 seconds. The device will
pressed for
11