1.3 Symbols in the Operator's Manual
•
A warning box indicates the risk of personal injury, especially if the
instructions are not followed.
WARNING
Text
•
An information box indicates the risk of material damage, especi-
ally if the instructions are not followed. The box is also used where
there is a risk of user error.
IMPORTANT INFORMATION
Text
1.4 Safety instructions
Use
This robotic lawnmower is designed to mow grass in open and level
ground areas. It may only be used with the equipment recommended by
the manufacturer. All other types of use are incorrect. The
manufacturer's instructions with regard to operation/maintenance and
repair must be followed precisely.
Never use the robotic lawnmower when persons, especially children, or
pets, are in the cutting area. If there are persons, or pets, in the cutting
area it is recommended that the lawnmower be programmed for use
during hours when the area is free from persons, e.g. at night.
The robotic lawnmower may only be operated, maintained, and repaired
by persons that are fully conversant with its special characteristics and
safety regulations. Please read the Operator's Manual carefully and
make sure you understand the instructions before using the robotic
lawnmower.
It is not permitted to modify the original design of the robotic lawnmo-
wer. All modifications are made at your own risk.
Check that there are no stones, branches, tools, toys or other objects on
the lawn that can damage the blades. Objects on the lawn can also lead
to the robotic lawnmower getting stuck in them and help may be requi-
red to remove the object before the mower can continue mowing.
Start the robotic lawnmower according to the instructions. When the
main switch is set to 1; make sure to keep your hands and feet away
from the rotating blades. Never put your hands and feet under the robo-
tic lawnmower.
Never lift up the robotic lawnmower or carry it around when the main
switch is in position 1.
Do not let persons who do not know how the robotic lawnmower works
and behaves use it.
The robotic lawnmower must never be allowed to collide with persons or
other living creatures. If a person or other living creature comes in the
lawnmower's way it shall be stopped immediately.
Do not put anything on top of the robotic lawnmower or its charging sta-
tion.
Do not allow the robotic lawnmower to be used with a defective blade
disc or body. Neither should it be used with defective blades, screws,
nuts or wires.
Do not use the robotic lawnmower if the main switch does not work.
Always switch off the robotic lawnmower using the main switch when the
robotic lawnmower is not in use. The robotic lawnmower can only start when
the main switch is set to 1 and the correct PIN code has been entered.
The robotic lawnmower must never be used at the same time as a
sprinkler. In this case use the timer function so the mower and sprinkler
never run simultaneously.
50 - English
1157864-30,SLIM_HQ 105-450_ESPTITEN_r2.indd 50
ENGLISH
Husqvarna AB does not guarantee full compatibility between the robotic
lawnmower and other types of wireless systems such as remote con-
trols, radio transmitters, hearing loops, underground electric animal fen-
cing or similar.
The built-in alarm is very loud. Be careful, especially if the robotic lawn-
mower is handled indoors.
Connecting the power supply
Take the following into consideration when planning where to place the
power supply
• Close to the charging station
• Protection from rain
• Protection from direct sunlight
If the power supply is connected to an electrical socket outdoors, this
must be approved for outdoor use. It is recommended to use an earth
fault-breaker when connecting the power supply to the wall socket.
The low voltage cable must not under any circumstances be shortened
or extended. Place the low voltage cable so that the blades on the blade
disc can never come in contact with it.
Do not, under any circumstances, mount the power supply at a height
where there is a risk it can be submerged in water (at least 30 cm from
the ground). It is not permitted to place the power supply on the ground.
Never connect the power supply to a outlet if plug or cord is damaged.
Damaged or entangled cord increase the risk of electric shock.
Transport
The original packaging should be used when transporting the robotic
lawnmower over long distances.
To safely move from or within the working area:
1.
Press the STOP button to stop the robotic lawnmower. If security is
set to the medium or high level, the PIN code has to be entered.
The PIN code has four digits and is chosen when the robotic
lawnmower is started for the first time.
2.
Set the main switch to position 0.
Automower 105
Automower 310/315
Automower 420/430X/450X
2016-02-19 16:04:23