Daily Use; Automatic Heat Up; The Heat Setting; Activating And Deactivating The Outer Rings - AEG HK634060XB Manual De Instrucciones

Ocultar thumbs Ver también para HK634060XB:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 111

5. DAILY USE

WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch
for 1 second to activate or
deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth, etc.). An acoustic
signal sounds and the hob deactivates.
Remove the object or clean the control
panel.
• you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9

5.3 The heat setting

Touch
to increase the heat setting. Touch
to decrease the heat setting. Touch
and
at the same time to deactivate the
cooking zone.
5.4 Activating and deactivating the
outer rings
You can adjust the surface you cook to the
dimension of the cookware.
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
Use sensor field:
To activate the outer ring: touch the sensor
field. The indicator comes on.
To deactivate the outer ring: touch the
sensor field until the indicator goes out.

5.5 Automatic Heat Up

If you activate this function you can get a
necessary heat setting in a shorter time. The
function sets the highest heat setting for
some time and then decreases to the correct
heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
until the correct heat setting
comes on. After 3 seconds
To deactivate the function: touch
5.6 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function or change the
time: touch
or
time (00 - 99 minutes). When the indicator of
the cooking zone starts to flash, the time
counts down.
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To deactivate the function: touch
the cooking zone and then touch
comes on.
.
of the timer to set the
to set
to set
. The
ENGLISH
41
Tabla de contenido

Solución de problemas

loading

Tabla de contenido