Step 4 - Testing And Getting To Know Your Monitor - Angelcare AC1120 Manual Del Propietário

WARNING
STRANGULATION HAZARD.
Children have STRANGLED in cords.
• Keep adapter cords out of the reach of children
(more than 3 ft [0.9 m] away).
• Because of the serious strangulation risk to infants
and toddlers, parents and caregivers should never
place the Nursery Unit within 3 feet (0.9 meter) of a
crib.
• NEVER use extension cords with AC adapters. ONLY
use the AC adapters provided. This product is not a
toy. Never allow children to play with it.

STEP 4 - TESTING AND GETTING TO KNOW YOUR MONITOR

The Angelcare ® monitor can be used with the pre-program factory settings or you can
also customise your settings to your preference.
All changes and
adjustments made
in the main menu and
sub-menus will not be
activated unless you
confirm them by pressing
the OK icon.
4.1 - SOUND
TO ACTIVATE SOUND:
1
2
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IMPORTANT
To avoid feedback (whistling), keep
both units at least 3 meters apart.
IMPORTANT
When in menu or sub-menu modes,
sound transmission between Parent
and Nursery Units will be temporarily
deactivated.
1) Press Menu icon to access
main menu.
2) Press sound icon to activate
or deactivate sound.
ON
3) Press OK icon to confirm.
IF YOU HEAR NO SOUND:
• Check that both units are powered on.
• Check that both units are plugged
into functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them if necessary).
• Bring the Parent Unit closer to the
Nursery Unit.
OFF
11
E
N