Step 4 - Test And Get To Know Your Monitor - Angelcare AC1120 Manual Del Propietário

STEP 4 - TEST AND GET TO KNOW YOUR MONiTOR

The Angelcare monitor can be used with the pre-program factory settings or you can
®
also customize your settings to your preference.
All changes and
adjustments made
in the main menu and
sub-menus will not be
activated unless you
confirm them by pressing
the OK icon.
4.1 - SOUND
TO ACTivATE SOUND:
1
2
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
iMPORTANT
To avoid feedback (whistling), keep
both units at least 3m apart (10ft.).
ADJUST SOUND LEvEL
Raise volume (+)
Lower volume (-)
iMPORTANT
When in menu or sub-menu modes,
sound transmission between Parent
and Nursery Units will be temporarily
deactivated.
1) Press Menu icon to access
main menu.
2) Press sound icon to activate
or deactivate sound.
3) Press OK icon to confirm.
iF YOU hEAR NO SOUND:
• Check that both units are powered on.
• Check that both units are plugged
into functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them if necessary).
• Bring Parent Unit closer to Nursery Unit.
PUT iN SiLENT/MUTE MODE
Press the (-)
button for 2
seconds to
mute sound.
ON OFF
PUT iN DiALOGUE MODE
E
N
Press and hold
talk button to
speak to baby.
11 11