Smart Appliance Connectivity - LG VM122H6 NJM0 Manual Del Propietário

Using the Low Heating Function
This function operates the heating system to maintain
a minimum room temperature and prevent objects in
the room from freezing where there is no permanent
resident, such as a vacation.
• , are displayed on the display screen.
NOTE
• This function is available with Heating Mode.
• During LH operation, when you press buttons such
as , , MODE, FAN SPEED, and then return
to Heating Mode, 30°C, high speed.
• If JET MODE button is pressed during LH
operation, this function is disabled and Power
Heating Mode is operated immediately. (only for
power heating model)
• In case an error occurred, operation can be
interrupted for the protection of the product.
• COMFORT AIR and
while the LH function is in operation.
Using the Mosquito Away
Function(Optional)
This function fans away mosquitos by generating a
high-frequency wave.
• is displayed on the display screen.
NOTE
• You can use this function without turning the air
conditioner on.
Using the Auto Clean Function
is generated inside the indoor unit. This function
removes such moisture.
• is displayed on the display screen.
NOTE
• Some buttons cannot be used while the Auto Clean
function is in operation.
• If you turn off the power, the fan operates for 30
minutes and cleans the inside of the indoor unit.
20
button cannot be used

Smart Appliance Connectivity

Using the Wi-Fi Pairing
Function(Optional)
Once it is connected to the internet through a home
Wi-Fi network, you can control the appliance remotely
with the application for the smart phone.
• Press and hold the
kW [3 s]
simultaneously about 3 seconds.
NOTE
• It is not displayed on the wireless remote control.
• For more information, read manual in Wi-Fi
module.
Using the Smart Diagnosis
Function(Optional)
Smart Diagnosis allows users to conveniently check
maintenance information of a product.
• Easily checking operational status of the air
conditioner.
• Easily understanding the error messages.
• Helping to improve device performance and
expand product life.
1
Search and download LG A/C Smart Diagnosis
in Google play or App store.
2
Click the Receive button on the main screen on
your phone.
3
Press and hold the ROOM TEMP button about 5
seconds aim at the indoor unit.
4
Hold your phone close to the indoor unit.
• Buzzer beeps will be received by your phone.
5
NOTE
• Be sure to keep ambient noise to a minimum or the
phone may not correctly receive the buzzer beeps
from the indoor unit.
and JET MODE button