Wireless Remote Control - LG VM122H6 NJM0 Manual Del Propietário

Wireless Remote Control

Inserting Batteries
If the display screen of the remote control begins
to fade, replace the batteries. Insert AAA (1.5 V)
batteries before using the remote control.
1
Remove the battery cover.
2
Insert the new batteries and make sure that the
+ and - terminals of the batteries are installed
correctly.
Installing the Remote Control Holder
To protect the remote control, install the holder where
there is no direct sunlight.
1
Choose a safe and easily accessible location.
2
screwdriver.
Operating method
Point the remote control towards the signal receiver
at the right side of the air conditioner to operate it.
NOTE
• The remote control may operate other electronic
devices if it is directed towards them. Make sure to
point the remote control towards the air conditioner
signal receiver.
• For proper operation, use a soft cloth to clean the
signal transmitter and receiver.
• In case of a function not provided in the product,
no buzzer sound occurs from the product when a
button for such function on the remote control is
pressed except for Air Flow Direction(
Display(
kW [3 s]
Setting the Current Time
1
Insert batteries.
• The icon below blinks at the bottom of the
2
Press
3
Press SET/CANCEL
NOTE
• The On/Off Timer is available after setting the
current time.
Using the °C/°F Conversion
Function(Optional)
This function changes unit between °C and °F.
• Press and hold
Operating the Air Conditioner
Without the Remote Control
You can use the ON/OFF button of the indoor unit to
operate the air conditioner when the remote control is
unavailable.
1
Open the front cover (Type1) or horizontal
vane(Type2).
2
Press the ON/OFF button.
Type1
Type2
NOTE
• The stepping motor may be broken, if the horizontal
vane opens rapidly.
• The fan speed is set to high.
• The feature may be changed according to the type
of model.
• The temperature cannot be altered when using this
emergency On/Off button.
), Energy
• For cooling-only models, the temperature is set to 22 °C.
).
• For cooling & heating models, the temperature is
set from 22 °C to 24 °C.
display screen.
or button to select the minutes.
button about 5 seconds.
SWING
℃↔℉ [5 s]
ON/OFF
ON/OFF
9