Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation Instructions – LDA3B /LDA3BCP Commercial Recessed Adjustable LED
WIRING
Ceiling Access Only Fixtures
1.
Remove the outer JBOX cover (driver attached to
cover).
Figure 4a.
Low Voltage Barrier
(provided on applicable units)
Figure 4c.
Below Ceiling Access Fixtures
1.
2.
3.
4.
5.
Remove Driver Door
to Make Connections
Figure 4b.
Remove outer JBOX door. Connect supply leads and
appropriate dimming/ controls leads as specified in
the wiring diagrams and in accordance with your local
electrical code(s) or N.E.C. (see Figure 4a).
Connect dimming wires and keep a minimum of 10in
[250mm] of insulated unshielded wire inside the JBOX.
Connect supply wires and keep a minimum of 10in
[250mm] of insulated unshielded wire inside JBOX.
Replace outer JBOX door.
See Figure 4b-4c for visual assistance.
PORTFOLIO
IB520076ML
Remove JBOX Door
Installation instructions
3
Tabla de contenido
