Prepare The Site - Kohler K-2834 Guia De Instalacion

Cut-out Line

1. Prepare the Site

For Installations with a Countertop Faucet
Determine the faucet centerline location. Refer to the roughing-in
information provided with your faucet.
Carefully draw the calculated faucet centerline on the cut-out
template.
Cut along the "above-counter cut-out" line on the cut-out
template with a scissors.
Using the centerlines as a guide, squarely position the cut-out
template on the countertop to ensure clearance between the
lavatory, faucet, and backsplash.
Use a pencil to trace around the "above-counter cut-out" line on
the countertop.
NOTE: Ensure the faucet spout will reach a minimum of 4" (10.2
cm) over the rim of the lavatory and the stream of water is directed
toward the center of the lavatory basin.
Recheck the clearance between the lavatory, faucet, and
backsplash. Adjust the traced cut-out line, if necessary.
Use a pencil to mark the: (1) exact center of the four mounting
hole locations on the countertop, and (2) faucet and handle
centerline on the countertop.
IMPORTANT! Do not cut the marked faucet and handle locations
until instructed to do so.
Kohler Co.
Backsplash
Outside Edge
of Lavatory
5 1061942-2-B