Specifications; Features; Assembly Instructions - Master MH-45-KFA Manual Del Usuario

Model #
Rating: Btu/Hr / kW
Fuel Consumption: Gal/Hr / L/Hr
Fuel Tank Capacity: Gallons / Liters
Pump Pressure: psi / BAR
Volts: AC/Hz
Amps
Phase
Upper Shell
Hot Air Outlet
Lower Shell
Lamp
Thermostat Knob
(80T KFA Only)
Fuel Tank
Power/Reset Switch
ASSEMBLY INSTRUCTIONS (140T-KFA / 190T-KFA / 215T-KFA)
1. Tilt the heater tank backward and attach the Wheel
Support Frame by inserting it into the button spring
clips at the back of the bottom support frame.
Axle Support
Tire
Axle Nut
2. Attach the axle supports by inserting them into
the button spring clips at the front of the bottom
support frame.
© 2019 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR

SPECIFICATIONS

45-KFA
45,000 / 13.2
0.35 / 1.3
5 / 19
3.0 / 0.21
120VAC / 60Hz
1.4
Single
Specifications subject to change without notice.
Extension Cord Wrap
Handle
Fan Guard
Pressure Gauge
Fuel Gauge
Fuel Cap
Power Cord
Axle
Spacer
Figure 1
WHILE CONNECTED TO A POWER SOURCE
80T-KFA 140T-KFA
80,000 / 23.4 140,000 / 41
0.63 / 2.38 1.1 / 4.16
5 / 19 10 / 38
4.2 / 0.29 6.6 / 0.46
120VAC / 60Hz 120VAC / 60Hz
1.5
Single Single

FEATURES

Upper Shell
Hot Air
Outlet
Lower Shell
Fuel Gauge
3. Insert the axle through the holes in the axle supports.
4. Slide the spacers onto the axle.
5. Slide the wheels onto the axle and secure with the
axle nuts.
6. Attach the rear handle by inserting the handle
into the button spring clips at the rear of the top
support frame.
7. Check all parts to ensure they are secure before
operating the heater.
5
Kerosene Forced Air Heater User's Manual
190T-KFA
190,000 / 55.7
1.42 / 5.4
13 / 49
8.5 / 0.59
120VAC / 60Hz
2.4 2.7
Single
Thermostat
Fuel Cap Lamp Knob
Drain Bolt
215T-KFA
215,000 / 63
1.63 / 6.2
13 / 49
9.0 / 0.62
120VAC / 60Hz
2.8
Single
Rear Handle
Fan Guard
Pressure
Gauge
Power
Cord
Fuel Tank
Digital Temperature
Display