Important Recommendations - Tractel LDR 06 Manual De Instalación, De Utilización Y De Mantenimiento

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25

1. Important Recommendations

1. Before using a work position securing lanyard,
it is essential for safe use of equipment and its
effi   ciency, that the operator reads and understands 
the  information  provided  in  the  TRACTEL  SAS 
manual. This manual must be constantly available 
to any user. Additional copies may be provided by 
Tractel SAS on request.
2. Before  using  this  safety  equipment,  you  must  be 
trained  in  its  use.  Check  the  state  of  associated 
equipment and ensure that there are no obstacles 
below the working area. 
3. A  work  position  securing  lanyard  can  only  be 
used by a person trained and competent or by an 
operator under the supervision of such a person.
4. If a work position securing lanyard is not in obvious 
good condition, the entire equipment set should be 
checked by TRACTEL SAS or by an approved and 
competent  technician  who  can  provide  written 
authorisation  to  return  the  system  to  use.  We 
recommend a visual inspection before each use.
5. No  modifi   cation  or  addition  may  be  made  to 
the  equipment  without  prior  authorisation  from 
TRACTEL  SAS.  The  equipment  should  be 
transported and stored in its original packaging.
6. Any  work  position  securing  lanyard  that  has 
not  undergone  periodical  inspection  within  the 
previous 12 months must not be used. It may not 
be used again until a new periodical inspection has 
been  carried  out  by  an  approved  and  competent 
technician  who  can  provide  written  authorisation 
to  return  it  to  use.  Failing  this  examination  and 
authorisation,  the  work  position  securing  lanyard 
will be disassembled and destroyed.
7. The maximum working load is 150 kg forthe work 
position securing lanyard.
8. If the weight of the operator plus their equipment 
and  tooling  is  comprised  between  100  and  150 
kg,  it  is  essential  that  you  check  that  this  total 
weight  (operator  +  equipment  +  tools)  does  not 
exceed  the  maximum  working  load  of  any  of  the 
equipment comprising the fall arrest system.
9. This  equipment  is  suitable  for  use  on  a  worksite 
in  the  open  air  and  within  a  temperature  range 
of -30°C and +60°C. Avoid all contact with sharp 
edges, abrasive surfaces and chemical products.
10. If you must assign the equipment to an employee 
or similar person, please comply with the relevant 
labour regulations.
11. The  operator  must  be  in  excellent  physical  and 
mental  health  in  order  to  use  this  equipment. 
If  in  doubt,  consult  your  doctor  or  occupational 
therapist. Prohibited to pregnant women.
12. The equipment must not be used beyond its limits, 
or  in  any  situation  other  that  that  for  which  it  is 
designed: see '4. Functions and description'.
13. We  recommend  that  each  operator  be  allocated 
their  own  work  position  securing  lanyard, 
especially if this is an employee.
14. Before  using  an  EN  363  fall  arrest  system,  the 
user  must  ensure  that  each  of  the  components 
is in good operating condition: safety system
and locking. When setting up, there should be no 
damage to safety functions.
15. In a fall arrest system, it is essential for safety
reasons, to check the free space required by the 
operator  in  the  workplace  before  use,  so  that  in 
case  of  a  fall  there  is  no  chance  of  collision  with 
the ground, or the presence of any other obstacle 
in the path of the fall.
16. A  fall  arrest  harness  is  the  only  body  support 
available to the fall arrest system user.
17. It  is  essential  for  the  safety  of  the  operator  that 
the  fall  arrest  system,  the  anchor  point  and  the 
lifeline  are  positioned  correctly  and  that  the  work 
is  achieved  in  order  to  minimise  the  risk  of  falls 
and their height.
18. For the operator's safety, if the equipment is sold 
outside of it original destination country, the dealer 
must provide: a manual, maintenance instructions, 
instructions for periodical inspections and repairs,
all  in  the  language  of  the  country  in  which  the 
equipment will be used.
19. The  LDR  /  LCM  06  is  a  workstation  securing 
lanyard,  compliant  with  the  EN  358  standard. 
This equipment can only be used by one person, 
equipped  with  a  work  position  support  belt. 
(EN  358).  This  equipment  is  not  a  fall  arrest 
system;  it  should  not  be  used  on  its  own  if  there 
is any risk of falling. If the securing lanyard is used 
in  a  situation  where  there  is  a  risk  of  falling,  it  is 
essential that it be used in conjunction with a fall 
arrest system combined with an EN 361 harness.
20. During  use,  the  adjustment  and  attachment 
elements  must  be  checked.  Check  also  that  the 
equipment is protected against any hazards: sharp 
edges, friction, sources of heat, etc..
For any special applications, please contact
TRACTEL
NOTE
.
®
3
GB
Tabla de contenido
loading

Este manual también es adecuado para:

Lcm 06

Tabla de contenido