How To Assemble Your Light Kit - Fanimation DOREN FP8533 Serie Manual De Instrucciones

How to Assemble Your Ceiling Fan Blades (Continued)
3. Secure the blade holders to the bottom of the motor
assembly using the 1/4˝-20 screws from the hardware bag.
(Figure 3)
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between the rotating blades.
How to Assemble Your Light Kit Assembly
1. Remove one of the three screws in the support
bracket and retain the screw for later. Slightly loosen
the remaining two screws. (Figure 1)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
2. Assemble the light plate assembly to the adaptor
plate of the motor assembly using the two key slots in
the light plate assembly. Replace the third screw and
secure all three screws. (Figure 2)
1/4˝-20 Screws
(2 per assembly)
Motor
Assembly
HARDWARE USED:
1/4˝-20
SCREWS
13
Blade Holder
Figure 3
x 10
Motor
Assembly
Figure 1
Light Plate
Assembly
Figure 2