Fanimation DOREN FP8533 Serie Manual De Instrucciones página 14

How to Assemble Your Light Kit Assembly (
3. Remove one of the three screws in the light plate
assembly and retain the screw for later. Slightly
loosen the remaining two screws. (Figure 3)
4. Connect the 2 single pin connectors from the light kit
to the 2 single pin connectors from motor assembly.
(Figure 4)
5. Assemble the light kit to the light plate assembly
using the two key slots. Replace the screw removed in
Step 3 and secure all three screws. (Figure 5)
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
Secure the glass to light kit by twisting in a clockwise
6.
direction. Twist the glass gradually
on to the light kit.
until it snaps
Do not over-tighten. (Figure 6)
Light Plate
Assembly
Glass
14
Continued)
Light Plate
Assembly
Figure 3
Light Kit
Figure 4
Light Kit
Figure 5
Figure 6
Motor
Assembly
Light Kit