Bang & Olufsen 8660 Centro De Servicio Guía De Reparación página 4

9.3 Specifi cation guidelines for BeoVision 1 (Update II)
SPECIFICATION GUIDELINES FOR SERVICE USE
CTV system
Menu languages
Power consumption
Optional
Satellite module
Set-top box Controller
Modulator system B/G
Modulator system I
Master Link module
Power Link module
Motor kit
Antirefl ection coated contrast screen (Only available factory fi tted)
Floor stand, low
Table stand
Video stand, high gloss black
Wall bracket
Floor stand, high
CONNECTIONS
V.TAPE & AV
BeoVision 1 Update II
*See type survey
English, German, French, Italian, Danish, Swedish, Dutch, Spanish
Typical 81 watts, St By < 0.8 watts
4190
4195
4016
4018
4015
4017
4193
4192
4186
4185
4189
4188
4187 (plate)
4199 (tube)
4194 (base)
Pin 1 Audio R out 1V RMS 150 ohms
Pin 2 Audio R in 1V RMS 40 kohms
Pin 3 Audio L out 1V RMS 150 ohms
Pin 4 Audio GND
Pin 5 Blue GND
Pin 6 Audio L in 1V RMS 40 kohms
Pin 7 Blue in 0.7 Vpp 75 ohms
Pin 8 Play voltage: Logic 0 = 0V to 2V
Logic 1 = 9.5V to 12V (4:3 info)
5V to 7V = 16:9 info
V.TAPE Data in/out
AV Data out
Pin 9 Green GND
Pin 10 Not used
Pin 11 Green in 0.7 Vpp 75 ohms
Pin 12 Not used
Pin 13 Red GND
Pin 14 Blanking GND
Pin 15 Red in 0.7 Vpp 75 ohms
Pin 16 Blanking in Logic 0 = 0V to 0.4V
Logic 1 = 1V to 3V
R in 75 ohms
Pin 17 Video out GND
Pin 18 Video in GND
Pin 19 Composite video out 1 Vpp 75 ohms
Pin 20 Composite video in 1 Vpp 75 ohms
Pin 21 Shield
Note 1: Pin 15 is also used for C in.
Note 2: Pin 20 is also used for Y in.
(Note 1)
(Note 2)