Input Wiring Specifications - ESAB Cutmaster 40 Manual De Instrucciones

NOTE!
Weight includes torch & leads, input power cord, and work cable with clamp.
CAUTION
!
Provide clearance for proper air flow through the power supply. Operation without
proper air flow will inhibit proper cooling and reduce duty cycle.

2.06 Input Wiring Specifications

Input
Voltage Freq.
(Volts-AC) (Hz)
115 50/60
230 50/60
240 50/60
Line Voltages with Suggested Circuit Protection
Motor start fuses or thermal circuit breakers are recommended for this application. Check local requirements for
your situation in this regard.
NOTE!
Refer to Local and National Codes or local authority having jurisdiction for proper wiring
requirements.
Cable size is de-rated based on the Duty Cycle of the equipment.
The suggested sizes are based on flexible power cable with power plug installations.
Cable conductor temperature used is 167° F (75° C).
300X5394
20
20
7" (177mm)
26lb / 11.8kg
Figure 2-1: Power Supply Dimensions & Weight
ESAB Cutmaster 40 Input Power Requirements
®
Power Input Current Input
(kVA) Max (Amps)
1-Ph
3.3
5.0
5.0
2-3
ESAB CUTMASTER 40
9" (228.6mm)
120V 15A
120V 20A
230V 20A
30
24
27
A
40
18.5" (469.9mm)
Art# A-12781
Current Input
Ieff (Amps)
1-Ph 1-Ph
28.5 15
21.4 13.5
20.8 13
Suggested Sizes (See Note)
Fuse (Amps)
1-Ph
32
16
16
INTRODUCTION