Idiomas disponibles
Idiomas disponibles
Technical details
Total height
950 mm
Seat height
492 mm (without seat cushion)
528 mm (with seat cushion)
Height of backrest
375 mm
Width
560 mm
Seat depth
420 mm
Seat width
420 mm
Length
820 mm
Dismantled length
550 mm (without footrests)
Dismantled height
590 mm (Place the backrest on
the seat)
Distance between
226 mm (with seat cushion)
armpad and seat
Front location of
370 mm
armpad structure
Total weight
Approx. 13 kg
Dismantled weight
Frame: 7,75 kg;
Backrest: 2,5 kg;
Footrests: 1,65 kg (pair);
Seat cushion: 1,05 kg
Max. nominal load
120 kg
Wheels
125 mm (2 with brakes, 2
without brakes)
Volume toilet bucket
5 l
Contents of the consignment
- Frame (incl. commode seat,
seat cushion, armrests, 4 steering
castors, 2 fixing screws for
backrest)
- Backrest
- Footrests with footplates
- Toilet bucket with cover
- Instruction manual
Usage
Mobile toilet commode for occasional use at
home. Not to be used as a shower stool, for
storage, as a ladder or a wheelchair.
Assembly instructions
Position the base-frame in front of you facing
forwards. Hold the backrest on the side at the
armrest screws (in doing this, the armrests
should hang down) and guide the back tubing
into the tube openings provided on the base-
frame. Turn the locking screws until they are
tight.
INSTRUCTION MANUAL 139E
1
The locking screws must be released,
otherwise it may not be possible to insert the
back tubing properly.
Check that the back tubes are not jammed or
skewed and that they are pushed in fully.
1 = Backrest
2 = Armpad
3 = Armrest
4 = Seat cushion
5 = Toilet bucket
Armrests
You can now place the armrests in the receivers
provided on the base-frame, by rotating the
armrests on their screw fixings, in a curve to the
front from behind the backrest. Push the
supporting tube of the armrests gently into the
receiver.
Footrests
The footrest receivers are to be found on the
front frame tubes of the toilet chair. Fold the
footplates out from the footrests, so that you can
see which side the relevant footrest should be
fitted. The footrests are fitted from the side into
the two guide bolts and swung to the centre of
the chair until they lock in place.
If this does not happen immediately, gently press
again inwards, while gently pressing the retaining
mechanism (inner side of footrest hanger).
6 = Footrest
7 = Footplate
8 = Castor without brake
9 = Castor with brake
10 = Frame
