The gas cylinder must have a connection compatible
with the regulator supplied with the side burner and
have a minimum capacity of 4kg / 9lbs.
SIDE BURNER USER INSTRUCTIONS
Before proceeding, make certain that you understand
the warning statements in this manual.
BEFORE USING THIS APPLIANCE
1.
Please read all of these instructions and appliance
owners manual prior to installation and use.
2.
FOR OUTDOOR USE ONLY!
•
Appliance and tank must be in open, well
ventialted outdoor area prior to connection and
use. Make sure tank valve is fully closed and not
leaking prior to moving or connecting.
•
NEVER USE IN A GARAGE OR UNDER OVERHANGS!
•
NEVER STORE A SPARE CYLINDER OR ANY
FLAMMABLE LIQUID OR GAS UNDER OR NEAR
THIS APPLIANCE OR ANY OTHER HEAT SOURCE.
3.
Be sure tank valve and regulator are proper
mating types, with correct threads or fittings, see
manual.
4.
Inspect tank valve, regulator, hose and fittings
to be sure they are clean, free of dirt, debris, not
plugged and not damaged. If damaged replace
before use. See local LP dealer for repairs.
5.
Prior to connection, turn all control valves to the
OFF position.
6.
Connect regulator to tank valve according to
appliance owners manual. Handle cylinder with
care - the contents are under high pressure.
7.
If good connection has been made, slowly open
tank valve to full open. Use a soapy water solution
to check all gas connections for leaks before
lighting appliance.
•
NEVER TEST WITH OPEN FLAME!
•
IF YOU SMELL GAS OR A LEAK IS FOUND:
— SHUT OFF GAS AT THE TANK VALVE IMMEDIATELY.
— EXTINGUISH ANY OPEN FLAME, OR OTHER
POTENTIAL IGNITION SOURCE.
— DO NOT USE APPLIANCE UNTIL REPAIRS ARE
MADE BY QUALIFIED LP GAS DEALER.
— DO NOT ATTEMPT TO MAKE REPAIRS YOURSELF!
— DO NOT USE ANY APPLIANCE, OR PARTS, EXPOSED
TO OR DAMAGED BY FIRE!
8.
If not leaking, carefully light appliance and use
according to the instructions in this manual. This
appliance regulator and tank valve connection
may contain two or more important safety
features such as Excess Flow Control and High
Temperature Activated Shutoff.
•
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULT IN AN EXPLOSION OR FIRE THAT MAY
CAUSE PROPERTY DAMAGE, SERIOUS INJURY OR
DEATH!
•
NEVER LEAVE THIS APPLIANCE UNATTENDED
WHILE IN USE! NOT TO BE USED BY CHILDREN!
Lighting the side burner
•
Open the side burner lid.
6
•
Ensure the control knob is in the "OFF" position.
OFF
HI
LO
OFF
•
Turn on the gas supply at the gas cylinder.
•
Push control knob down and turn to ignition
position.
HI
•
Hold control knob in for at least 10 seconds to
ensure the burner stays lit.
•
If ignition does not occur in 5 seconds, turn the
burner control off, wait 5 minutes and repeat the
lighting procedure. Do not continuously hold the
control knob in as you may cause a build up of
gas.
•
In windy conditions shield from wind to ensure
easy lighting.
•
Turn control knob to alter burner settings as
required.
Manual Lighting Instructions
•
Place a lit match beside the burner (at the same
location as the sparker shield).
•
Push and turn the control knob to the high
position.
Always protect your hands when handling anything
near cooking surface of the side burner.
Turning off your side burner
Push the control knob in and turn to the "OFF"
position. Turn the gas off and disconnect the cylinder
when not in use. The regulator must be disconnected
when the side burner is not in use.
FOOD SAFETY
Please read and follow this advice when cooking on
your side burner:
•
Always wash your hands before and after
handling uncooked meat and before eating.
•
Always keep raw meat away from cooked meat
and other foods.
•
Before cooking, ensure side burner surfaces and
tools are clean and free of old food residue.
•
Do not use the same utensils to handle cooked
and uncooked foods.