Checking Connection To Router - Steren COM-840 Manual De Instrucciones

7. Press OK to close the Local Area
Connection Properties window.

3.2. Checking Connection to Router

After configuring the TCP/IP protocol, use the ping command to verify if the
computer can communicate with the Router. To execute the ping command,
open the DOS window and Ping the IP address of the 300Mbps Wireless-N
Broadband Router at the DOS prompt:
For Windows 98/Me: Start → Run. Type command and click OK.
For Windows 2000/XP: Start → Run. Type cmd and click OK.
For Windows 7 Start → Accessories → Command Prompt
At the DOS prompt, type the following command: ping 192.168.1.1
14