Steren COM-840 Manual De Instrucciones página 127

• Ensure the wireless adapter functions properly. You
may open the Device Manager in Windows to see if
the adapter is properly installed.
• Make sure the wireless client uses the correct SSID
and security settings (if enabled) for the router.
My wireless
• Ensure that the wireless adapter's TCP/IP settings
client cannot
are correct as required by your network administrator.
communicate with
another device in
• Ensure that in wireless basic settings you have
the network. not excluded one of your wireless devices – e.g.
you have set the router to 802.11n only but need to
connect with an 802.11g device.
• Check that all physical wire and power connections
are correct.
• Use the ping command to verify that the wireless
client is able to communicate with the router's LAN
port and with the remote computer. If the wireless
client can successfully ping the router' s LAN port
but fails to ping the remote computer, then verify the
TCP/IP settings of the remote computer.
61