Advanced - Steren COM-840 Manual De Instrucciones

4.5.1.7. Advanced

Authentication Type: The default is set to "Auto", which allows "Open
System" or "Shared Key" authentication to be used. Select "Shared Key" if
you only want to use "Shared Key" authentication (the sender and recipient
use a WEP key for authentication).
Beacon Interval: The interval time for this router to broadcast a beacon.
A beacon is used to synchronize the wireless network. The valid interval is
20-1000, the default is 100.
RTS Threshold: You can set RTS Threshold value in this field. The valid
range should be 256-2347 and default value is 2347. If a network packet is
smaller than the preset RTS threshold size, the RTS/CTS mechanism will
not be enabled.
Aggregation: You can accelerate the wireless transmission speed by
enabling the aggregation function. The default is AMPDU AMSDU.
Fragmentation Threshold: This specifies the maximum size of packet
during the fragmentation of data to be transmitted.
Transmission Rate: Transmit rate indicates the transmission speed of
wireless LAN access .The default setting is "Auto" and you can set this value
between 1-54Mbps range.
42
These settings are only for more
technically advanced users who have
a sufficient knowledge about their
wireless LAN. These settings should not
be changed unless you know what effect
the change will have on your AP.