Hardware Installation Procedures - Steren COM-840 Manual De Instrucciones

2.3. Hardware Installation Procedures

To set up the 300Mbps Wireless-N Broadband Router please refer to the
following picture:
Attach one end of an Ethernet cable to your computer's Ethernet port, and
the other end to one of the LAN ports of your router.
Connect another Ethernet cable from your Cable/DSL modem to the WAN
port of your router.
Connect the single DC output connector of the power adapter to the power
jack on the back of the router and plug the Power Adapter into an AC outlet.
8
LAN4 LAN3 LAN2 LAN1 DEFAULT WAN PWR WPS
1 2 3 4 WAN WLAN SYS POWER WPS
ADAPTADOR
DE CORRIENTE