Tennant 2120 Manual Del Operario Y Lista De Piezas página 3

This manual is furnished with each new model. It
provides necessary operation and maintenance
instructions and an illustrated parts list. Read this
manual completely and understand the machine
before operating or servicing.
Use the illustrated Parts List to order replacement
parts. Before ordering parts or supplies, be sure to
have your machine model number and serial number
available. Parts and supplies may be ordered by
phone or mail from any authorized parts and service
center, distributor or from any of the manufacturer's
subsidiaries.
This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:
The machine is operated with reasonable care.
S
The machine is maintained regularly - per the
S
maintenance instructions provided.
The machine is maintained with manufacturer
S
supplied or equivalent parts.
EC DECLARATION OF CONFORMITY FOR MACHINERY
EN
Model: 2120, 2140
TENNANT N.V.
Address: Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden--The Netherlands
Uden/Netherlands, 26- -05- -04
Richard van den Hoogen -- Technical Support Engineer
Tennant 2120/2140 (01- -2006)
nr.: 801321, 801214, 801322, 801215
Herewith declares, on our own responsibility, that the machinery
-- is in conformity with the provisions of the Machinery Directive (89/392/EEC), as amended with
91/368 EEC, 93/44 EEC, 93/68 EEC and with national implementing legislation
-- is in conformity with the provisions of the provisions of the E.M.C. Directive (89/336/EEC), as amended
with 91/263 EEC, 92/31 EEC, 93/67EEC , 93/68 EEC and with national implementing legislation
-- is in conformity with the provisions of the provisions of the Low Voltage Directive (73/23/EEC), as
amended with 93/68 EEC and with national implementing legislation
and that
-- the following (parts/clauses of) harmonized standards have been applied: EN: 292--1, 292--2, 292--3,
1050, 418, 982, 1037, 60204--1,61310--1, 61310--2, 457, 614--1, 1005--3, 563, 50081--2, 50082--2, 12895,
ISO: 3744, 3746,
-- the following (parts/clauses of) national technical standards and specifications have been used: NA
Home Find... Go To..
PROTECT THE ENVIRONMENT
Please dispose of packaging materials,
old machine components such as
batteries, hazardous fluids such as
antifreeze and oil, in a safe
environmentally way according to your
local waste disposal regulations.
Always remember to recycle.
TENNANT N.V.
Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden- -The Netherlands
[email protected]
www.tennantco.com
Specifications and parts are subject to change without notice.
Copyright E2006, 2008 Tennant Company. All rights reserved.
(Directive 89//392/EEC, Annex II, sub A)
OPERATION EN
3