Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Tools and Materials
5/8" OD
Copper Tubing
(1/2" Nominal)
Propane
Torch
Solder
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed
within this manual. Thanks again for choosing Kohler Company.
Before You Begin
WARNING: Risk of product damage. Leave the cap on the
diverter until the spout from the bath faucet trim is ready to
be installed. The diverter is an O-ring sealing surface which
may be damaged when unprotected.
NOTE: This product is for finished deck-mount or finished
rim-mount installations only.
NOTE: Instructions are given for installations with 8" (20.3 cm)
centers. For wider installations, adjust all roughing-in dimensions
and copper tube lengths accordingly.
NOTE: The installation of water hammer arrestors are not required,
but are recommended. Installing water hammer arrestors may
reduce or eliminate the possibility of water hammer when the user
turns the handles to the ON or OFF position.
Observe all local plumbing and building codes.
Shut off the water supply.
Protect the surface of the deck/rim during the installation.
1054252-2-B
Hacksaw or
Adjustable
Wrench
Tubing Cutter
Cloth Towel
Pipe
Wrench
2
Kohler Co.
Tabla de contenido
