Angelo Po BX61GW Manual De Uso página 36

In "convection cooking" mode you can adjust
the percentage of opening of the vent , which
is shown on the display (13) ("0" = vent always
open; "_._" = vent always closed).
– Increases the percentage of humidity: keep the but-
ton pressed to introduce humidity inside the oven
during any mixed or convection cooking phase.
– While cooking in "steam cooking" mode, this switch-
es from standard (Std) steam to super (Sup) steam
and vice-versa.
– To set the default value between Std and Sup
steam: With appliance in STOP phase (green indica-
tor light (2) on) press the button (14) longer than
3 seconds (the entire panel switches off ). Keep the
button (8) pressed and act on the knob (10) to se-
lect Std or SUP. Press the knob (10) to confi rm the
change made.
9) Product core probe or "vacuum" temperature
setting button
– Sets the cooking temperature inside the product:
measured by the core probe (optional) or with vacu-
um (optional); press once (green light fl ashes) to set
the temperature using the knob (10).
– Modifi es the temperature inside the product during
cooking: press once to show the temperature value
on the display (12).
Press the button and turn the knob (10) to modify
the value set.
Wait about 5 seconds for the new value set to be
saved.
This function disables use of the "Time setting"
button (Timer).
10) Control knob
– For varying the values of the functions selected (see
buttons 6, 7, 8, 9).
Turn the knob clockwise to increase the value and
anti-clockwise to decrease it.
– Used to modify the cooking and washing programming parameters and the appliance's func-
GB
tional parameters.
– Also confi rms and saves: press the knob to confi rm and save the settings selected and/or
shown on the display.
11) Temperature display
– Shows the value of the temperature set.
To display the real temperature inside the oven, keep button (6) pressed until the display shows
the dot in the lower right.
The value on the display fl ashes at the start of a cooking process when the temperature inside
the oven is higher than the temperature set and/or during preheating when the set temperatu-
re has not been reached.
– During a pause in cooking, it shows the number of the "Regeneration" program available for
selection using button (15).
12) Time and "product core probe" display
With button (7) (timer) pressed:
– In cooking pause status it shows the value of the time set.
– During cooking it shows the time left to the end of the cooking cycle.
With button (9) ("product core probe" temperature setting) pressed:
– In cooking pause status it shows the value of the temperature set.
– During cooking it shows the value of the temperature measured by the probe.
3378750_ut_GB
3 4 5
19
1
11
6
REAL
7
8
INJ
14
15
10
18
- 8 -
2
12
9
13
17
16
ENGLISH