Luminance Brands Kathy Ireland Home SUMMER NIGHT CF652BQ01 El Manual Del Propietario página 9

3. Ceiling Fan Assembly
3.11
Remove the Three Switch Housing Mounting Screws
(Figure 10) from the Switch Housing Plate.
Retain the Screws for future use in Step 3.13.
NOTE: If you are using an Luminance Brands light
fixture with your fan, remove the screw plug from
the bottom of the switch housing cover. Install the
light per the light kit Owner's Manual, following all
light kit instructions for wiring and installation.
3.12
Engage the connector of the Switch Housing Assembly with
the Motor Connector (Figure 11).
The Two Connectors are Keyed and Color-Coded and must be
mated correctly (color-to-color) before they can be engaged.
Make sure the Connector Latch closes properly.
(Continued)
SWITCH HOUSING
MOUNTING SCREWS (3)
Figure 10
SWITCH HOUSING
ASSEMBLY
Figure 11
Please contact 1-800-777-4440 for further assistance
9
SWITCH HOUSING
MOUNTING PLATE
SWITCH HOUSING
CONNECTOR
MOTOR CONNECTOR
luminancebrands.com
U.L. Model No.: CF652