Spasciani FUGEL FUGE RESCUE Instrucciones De Uso página 10

Fig. 1 FUGE with bag
A) Full face mask
The face mask, to which the demand regulator is connected, can be of the following models:
‐ TR 2002 BN CL3, TR 2002 S BN CL3 or TR 82 B certified to EN 136:98 Cl.3, with snap‐in connector to DIN
58600, for compatible demand regulator.
For further information see the information notice that comes with the product.
B) Demand Regulator
It is made of a reinforced plastic housing that holds the regulating device. It is connected by means of the
breathing hose (E) to the swivel connector. The push button on a side of the regulator locks the release of
the air flow which is activated with the first inspiration. The regulator is of the BN type (see paragraph
3.1.5).
C) Pressure reducer
It is made of a cast brass body that holds the device that reduces the outlet pressure to 9‐12 bar
throughout the duration of the air reserve. On the body you find:
(1) Pressure gauge
(2) Opening device
(3) Breathing hose connector
(4) Safety Valve
(5) Re‐filling connector
D) Cylinder
2 litres 300 bar, available either in steel or composite material. The filling
air complies with EN 12021 for breathable air. Filling connector: male
thread M16x1,25 with adaptor (p/n 531700000) to EN 144‐2.
E) Breathing Hose
Highly flexible and thin, it is fitted with a swivel connector allowing great
movement freedom to the user.
F) Carrying bag or harness
‐ The FUGE (see Figure 1) model is equipped with a carrying bag in strong
PVC coated fabric. The bag is completed with a strong shoulder strap (see
figure 1). A transparent side window allows reading the pressure gauge
and figuring out the set pressure level. This side shall always be visible to
the user both for checking pressure and easily opening the bag in case of
Fig.2 FUGE RESCUE with harness
Fig. 3 Pressure reducer
10 / 28