Description And Intended Purpose - Blatchford ElaniC Serie Guia Del Usuario

1 Description and Intended Purpose

These instructions are for the user. Please keep these instructions.
The term device is used throughout these instructions for use to refer to ElanIC.
Please read all these instructions for use, paying particular attention to the sections regarding
safety and maintenance.
Application
The is a biomimetic foot and ankle system with microprocessor controlled
device
dorsiflexion and plantarflexion. It is designed to adapt dynamically (via motorized valves) to
provide assistance when walking on a variety of surfaces, when changing gait speeds and
increased levels of safety and security when walking and standing,
weight of 125 kg (275 lbs).
Features
• Dynamic damping resistance aims to improve gait characteristics enabling safer walking
• Microprocessor control of resistance in real time
• The device Software adapts to individual user gait characteristics
• Standing Support mode
• Aims to reduce stress at the socket interface
• PC interface setup with Bluetooth® link and direct communications
• Power is supplied via an integral rechargeable battery pack
• Recharging through easy-to-use magnetically self-aligning inductive charger
• Waterproof according to the parameters described in this manual
This device provides limited self-alignment of the prosthesis on varied terrain
and following footwear changes.
balance stability and inter-limb loading symmetry while easing high
pressures at the socket interface.
The device and its charger must not be used by users of pacemakers or
implantable cardioverter-defibrillators (ICDs).
It is intended to improve postural sway,
3
up to the maximum user
938439PK1/1-0321